- Rated Power: 1500W / 2000W / 2500W
- Surge Power: 3000W / 4000W / 5000W
- DC Input Voltage: 12V / 24V
- AC Output Voltage: 220V~240V
- AC Output Frequency: 50Hz
- AC Output Waveform: Pure Sine Wave
- USB Output: DC 5V/2.1A
- Waveform distortion: THD<3% (Linear load)
- Efficiency (＞90% Load): ＞90%
- DC Input Voltage Range: 10.5V~15V / 21V~30V
- Input Low Voltage Alarm: 10.5V±0.3V / 21V±0.5V
- Input Low Voltage Shutdown Voltage: 10V±0.3V / 20V±0.5V
- Input High Voltage Shutdown Voltage: 15V±0.3V / 31V±0.5V
- No Load Current: < 0.5A (1500W / 2000W)
- < 0.7A (2500W)
- Surge Power Duration: 0.1S
- Net Weight: 3.2 kg (1500W)
- 3.9 kg (2000W)
- 4.3 kg (2500W)
- Package Weight: 4.2 kg (1500W)
- 5.1 kg (2000W)
- 5.4 kg (2500W)
- Dimensions (L x W x H): 30x15x13 cm (1500W / 2500W)
- 35x15x13 cm (2000W)
- Battery Cable (Cross-sectional area*length): 16mm²x750mm (1500W)
- 25mm²x600mm (2000W / 2500W)
- Fan Starting Temperature: ≥ 45 ℃
- Temperature Protection: 75 ℃
– High quality DC to AC pure sine wave.
– The main control chip adopts high-speed and stable MCU, intelligent control, real-time monitoring, AC output frequency is more accurate, and the work is more stable.
– With bipolar SPWM drive, the output sinusoidal waveform is more accurate and the inductive load capacity is stronger.
– Multiple protection functions: input low voltage shutdown protection, input high voltage shutdown protection, battery high and low voltage alarm, overload protection, output short circuit protection, and overheating protection.
– Automatic reset function: After input high voltage or low voltage shutdown, when the input voltage returns to normal, the inverter will automatically restore the output voltage.
– Safety isolation: input and output isolation.
– Soft start function, it is easier to run inductive and capacitive loads.
– Buzzer reminder device, once the protection of the inverter is triggered, the buzzer sounds an alarm to remind people.
– Remote controller with LCD, it can display battery power, input voltage, output voltage and frequency, alarm conditions and wattages of loads. The switch button can turn on/off the inverter. The remote control port is standard RJ45, you can replace longer cable to increase remote control distance.
– Dual USB ports on remote controller, output voltage 5V, maximum current 2.1A, can charge mobile phones and tablets.
– Anodized aluminum case, which not only has a beautiful appearance, but also has good heat dissipation performance, wear resistance, insulation, and durability.
– Dual intelligent temperature control fan to reduce unnecessary waste of battery power; When the internal temperature of the inverter is ≥45±5°C, the fan starts to work.
– Screw the terminal. Pluggable plug for easy cable replacement.