Description:
This robot is developed based on ESP8266 , with WiFi remote control function and ultrasonic obstacle avoidance function.
There are mainly 4 modules: ESP8266 controller, L9110S motor driver module, ultrasonic sensor module, and SG90 servo.
Through the ultrasonic sensor ranging, encountered obstacles, and automatic planning of the driving route.
This product adopts the welding-free installation design, the parts are fixed by the copper column and the screw structure,
the circuit connection between each electronic module is connected by the DuPont line, simple and convenient.
Notice:
This kit uses 18650 batteries, but we can’t ship any batteries by air, so kindly remind customers to prepare before receiving the kit.
The instructions are available and it will be sent to you by message or email.
|
ESP8266 Development Board *1
|
|
L9110S motor drive plate *1
|
|
HC-SR04 ultrasonic module *1
|
|
Ultrasonic sensor bracket *1
|
|
18650 battery box(without battery for shipping) *1
|
|
DC TT motor *2
|
|
Breadboard 170 *1
|
|
SG90 servo motor *1
|
|
Data cable *1
|
|
10cm male to female Dupont line *16
|
|
10cm male to male Dupont line *8
|
|
Mini DIY car chassis *1
|
|
Ball universal wheel *1
|
|
M2 nut * 2
|
|
M2 * 2 * 10 screw
|
|
M1.6-m7 * 4 * 10 screw
|
|
M1.6-m7 nut * 4
|
|
M3 * 30 screws *4
|
|
M3 * 25 double through copper column *6
|
|
M3 * 2 * 10 copper column
|
|
M3 nut * 12
|
|
M3 * 8 screws * 20
|
|
Transparent poly bag (180mm*260mm) *1
|
