Complete flexible solar panel kit 200w 300w and 12v solar panel module 300w for home/roof/motor/boat.
Specification
Maximum power 100W
Open circuit voltage 19.2V
Short circuit current 6.68A
Maximum power voltage 16V
Maximum power current 6.25A
Operating temperature 45±2℃
Temperature range -20℃～+80℃
Number of cells 32pcs
Net weight 1.9KG
Size 1050*530*2.5mm
Standard Test Conditions : Irradiance 1000w/m2,Temperature 25℃,AM=1.5
Features
High efficiency: conversion rate 19.6-21%.
Flexible: suitable for surface mounting.
Lightweight and easy to install & maintain.
Wide range of adaptation: Charging cars, boats, roofs, outdoors, mountains, grasslands, etc.
Packing list
(this product has 3 options, each option contains different products):
300w solar panel:
300w solar panel=3pcs solar panel（solar panel only）
200w solar panel kit:
2* 100w 12v flexible solar panel
1* 12v 20A solar controller
1* 2 in 1 PV adapter
1* Cable with waterproof PV connector
1* Cable with battery clip
1* Multilingual instruction manual
300w solar panel kit:
3* 100w 12v flexible solar panel
1* 12v 20A solar controller
1* 3 in 1 PV adapter
1* Cable with waterproof PV connector
1* Cable with battery clip
1* Multilingual instruction manual
NOTE
The regulator is only suitable for lead-acid batteries: OPEN, AMG, and GEL, it is not suited for nickel-metal hydride, lithium ions, or other batteries.
|
Technical parameter |
|||
|
Model |
Kw1210 |
Kw1220 |
Kw1230 |
|
batt voltage |
12V/24V AUTO |
||
|
Charge current |
10A |
20A |
30A |
|
Discharge current |
10A |
10A |
10A |
|
Max solar input |
12V battery, the highest 23v; 24V battery when the highest 46v |
||
|
Equalization |
B1 sealed |
B2 gel |
B3 flood |
|
14.4V |
14.2V |
14.6V |
|
|
Float charge |
13.7V (default adjustable) |
||
|
Discharge stop |
10.7V (default adjustable) |
||
|
Discharge reconnect |
12.6V (default adjustable) |
||
|
Charge reconnect |
13V |
||
|
The voltage of open light |
Solar panel 8V(Light lights delay) |
||
|
The voltage of close light |
Solar panel 8V(Light off delay) |
||
|
USB output |
2-way USB output, 5V/2.5A(MAX) |
||
|
Self-consume |
＜10mA |
||
|
Operating temperature |
-35℃～+60℃ |
||
|
Size/Weight |
133.5*70*35mm/165g |
||
System Connection:
1. Connect the battery to the charge regulator – plus and minus. it will show 1 if it detects a 12V battery, and 2 if it detects a 24V battery.
2. Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Safety Instructions:
1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize loss.
3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL(It is not suited for nickel-metal hydride, lithium ions, or other batteries).
4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
PS
Please strictly follow the instructions for installation and use. We are not responsible for product damage caused by the buyer’s use that is not in accordance with the instructions for use.
