About this controller:
1. Show current
Connect the controller to a 12V or 24V battery, and the screen will show the current for 5 seconds, the user knows the specification you purchase.
2.Input current &.voltage display
Users can see the input current and voltage from the solar panel, the function helps the user to test the quality of the solar panel(current x voltage =power).
3.Battery voltage display &.charge status
When battery is being charged,theis indicate light will flash, meanwhile you can read the battery voltage. The function helps user master battery statusclearly.
4.Output current display
When 12V or 24V load connected to the controller works,the screenshow the output current,this function helps user master the workingstatus of the load.
5. 4 pcs of USB output
This controller have 2 groups of USB output(4 pcs),each group with 2Acurrent which able to charge 4 pcs of iPhone 6s at the same time.
6. 12V/24V auto.voltage distinguish function
7. Over-charge, Over-discharge, and short-circuit protections,to ensure the system safe and prolong battery life.
8. With battery temperature compensation, ensure the best charge status indifferent environment.
9.Three stage charge mode:strong charge,constant current,floatingcharge intelligent control.
10.lf no operation after three minutes, the system automatically sleeps,press any key to restore.
|
Model NO. |
CP10A |
CP20A |
CP30A |
CP40A |
|
lnput Voltage |
<50V |
|||
|
Battery Voltage |
12V/24v auto.Distinguish |
|||
|
Max input Current |
10A |
20A |
30A |
4OA |
|
Full Voltage Cut-off |
14.4V/28.8V+/-0.2 |
|||
|
Low Voltage Cut-off |
10.7V/21.4V+/-0.2 |
|||
|
Charge Mode |
PwM |
|||
|
No load loss |
10 mA |
20 mA |
||
|
Temp.Compensation |
~4mV/degress centigrade |
|||
