Do you know the problem that you go on vacation for a long time or are not at home for a long time and when you come back all your plants have dried up?
With this practical automatic watering system, you can have your plants supplied with water automatically. This kit contains everything you need to build an automatic irrigation system.
All you need is a RasperyPI or an Arduino computer. And you’ll never have to worry about watering your plants again during your vacation.
[Easy to Use]This automated watering DIY Kit has become extremely popular since it automatically waters your plants and flowers according to monitor the soil moisture in a very efficient way.
[Automatic Watering System]Combine Pump, Tubing, Soil Moisture Sensor, and 4Channel 5V Relay Module in one plant watering system, including kits for a whole Arduino DIY drip irrigating system.
[Capacitive Sensor]Insert it into the soil around your plants and With an sn and a motherboard, you can talk to your plants. To see if your plants are thirsty, do they need more water to moisten them?
[Take Care of Your Plants Anytime] You can have the system water your plant automatically. Whenever your soil becomes too dry, the pump is set into motion and water flows up the tube and into the pot. You don’t have to worry about your plants while going on vacation.
Capacitive Soil Moisture Sensor:
Operating voltage: 3.3 ~ 5.5 VDC
Output voltage: 0 ~ 3.0 VDC
Size: 98 x 2m (LxW)
Pin: Analog signal output, GND, VCC
1 Channel 5V Relay Module:
VCC: Connect 5V Positive Pole Power Supply
GND: Connect 5V Negative Pole Power Supply
Mini Water Pump:
DC Voltage: 3-5 V
The outside diameter of the water outlet: 0.29inch/7.5mm
Inside diameter of water outlet: 0.17inch/4.5mm
Water inlet diameter: 0.19inch/5mm
Driving mode: brushless dc design, genetic driving
The continuous working life of 300 hours
Material: ABS, electronic components
4*capacitive soil moisture sensors
1*4 channel 5V relay module
1*4M water pipe
Only the above package content and other products are not included.