FNIRSI TC2 2.4 inch TFT Color Screen Digital Oscilloscope LCR Meter 2 in 1 Handheld PWM Signal Generator Oscilloscope with LED Backlight
1. FNIRSI-TC2 cleverly integrates a digital oscilloscope, electronic component tester, PWM signal generator and other functions into one. Equipped with a large-size color dot-matrix TFT display screen and built-in rechargeable lithium battery, it brings users more and stronger practical functions with a small size, and at the same time has good portability.
2. FNIRSI-TC2 has a variety of working modes such as oscilloscope and component tester. Each time you click the power button, it will enter the mode selection interface. Press the up and down keys of the direction keys to select: select the “Mos Test” item and press the “OK” key to enter the component tester mode; select the “Oscilloscope” item and press the “OK” key to enter the oscilloscope mode.
3. The “Mos Test” mode can test various types of transistors, and can determine the device type, pin polarity, hFE, turn-on voltage; it can test capacitors, resistors, inductance components, etc.
4. FNIRSI-TC2 is especially suitable for the fast pairing of transistors, identification of miscellaneous surface mount components and non-character components, and preliminary screening of small-batch components; the “Oscilloscope” mode can test the signal waveform of the circuit, and supports connection with a computer, you can refresh the official firmware by yourself to complete the upgrade.
Machine size: 103x79x31mm/4.06×3.11×1.22in
Charging type: USB Type-C / 5V
Power supply: built-in 1500mAh rechargeable lithium battery
Display: 2.4-inch TFT color screen, LED backlight
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.