MPPT 80A Solar Charger Support WIFI Module 1500W 12V High Frequency Hybrid Inverter 230V Output Max PV 450V Battery Charge
【Pure sine Wave Inverter】: 1500W Pure sine Wave Inverter 12V DC to AC 220/230/240V (Single phase/A Hot Leg 230V Output, Can’t Output 110V AC), built-in 80A Mppt charge controller, is a new all-in-one hybrid solar inverter charger, fit for 24V Lead-Acid (Seal, AGM, Gel, Flooded) and Lithium battery (Need to be set via the “User-Defined”).
【TECHNICAL SPECIFICATIONS】: 1.5KW Hybrid Solar Inverter Max.PV Input Power: 2000W, Voltage range: 130-430Vdc, Max.PV Input VOC: 450V DC, Starting voltage >130V; Recommended PV cable size: 16AWG, Max. charge current: 80A. Nominal Input Frequency: 50/60Hz; Output Power: 1500W, surge Capacity: 3000W.
【MULTIPLE CHARGING MODES】Off Grid Solar Inverter has 4 charging modes are optional, i.e. Only Solar, Mains Frist, Solar Frist, and Mains & Solar hybrid charging; and 3 output modes are available, i.e. Solar Frist, Mains Frist and SBU Priority, uninterrupted power supply to meet different application requirements. And compatible with mains voltage or generator power, Auto restart while AC is recovering.
【WIDE RANGE OF USES】:MPPT Inverter Charger Pure sine Wave 1500W for RV Camping Boat Home Emergency ect.. It can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads.（Be careful not to install it near the bedroom, the fan will make a sound when the inverter is running. Avoid affecting your rest (expect 50-70 db)）
【LCD & LED DISPLAY】:LCD display designand 3 LED indicators for dynamic display of system data and operating status, Configurable battery charging current, AC/Solar Charger priority and Load Supply Priority via LCD setting. Support WIFI/ GPRS remote monitoring, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.(Not included).
This is a multi-function inverter charger, combining functions of inverter, solar charger, and battery charger to offer uninterruptible power support with portable size.
Built in 80amp mppt controller, which integrates solar energy storage &means charging energy storage and AC sine wave output.It can be widely used in DC to AC areas, such as solar AC power systems, vehicle systems, RV power supply, security monitoring systems, emergency lighting systems, field power systems, household power systems, etc.
NOTE 1:
This is a wide voltage Hybrid inverter, The voltage that starts to connect to the solar panel must be above 130V for the Hybrid inverter to work normally. This means you can connect solar panels in series, saving you the cost of buying wires
NOTE 2:
The Battery Capacity OF The Correct Matching System Is Determined According To The Specific Usage Requirements OF The Load And Application Scenarios, Otherwise It will Easily Lead To Insufficient Battery Capacity Or Excessive Waste OF Power Generation.
Features:
Pure sine wave inverter
Configurable input voltage range for home appliances and personal computers via LCD setting
Configurable battery charging current based on applications via LCD setting
Configurable AC/Solar Charger priority via LCD setting（Battery charging mode and load working mode can be set）
Compatible to mains voltage or generator power
Auto restart while AC is recovering
Overload/ Over temperature/ short circuit protection
Smart battery charger design for optimized battery performance
Cold start function
WIFI/GPRS communication(Not included)
Fit for 12V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery (Need to be set via the “User-Defined”).
|
INVERTER MODEL |
2.4KW 24V |
|
|
Rated Output Power |
1.5KW |
2.4KW |
|
Input Voltage Waveform |
Sinusoidal (utility or generator) |
|
|
Nominal Input Voltage |
230Vac |
|
|
Output Voltage Waveform |
Pure Sine Wave |
|
|
Output Frequency |
50Hz |
|
|
Low Loss Voltage |
170Vac±7V (UPS)； 90Vac±7V (Appliances) |
|
|
Low Loss Return Voltage |
180Vac±7V (UPS); |
|
|
100Vac±7V (Appliances) |
||
|
High Loss Voltage |
280Vac±7V |
|
|
High Loss Return Voltage |
270Vac±7V |
|
|
Max AC Input Voltage |
300Vac |
|
|
Nominal Input Frequency |
50Hz/ 60Hz (Auto-detection) |
|
|
Output Short Circuit Protection |
Circuit Breaker |
|
|
Efficiency (Line Mode) |
>95% ( Rated R load, battery full charged ) |
|
|
Transfer Time |
10ms typical (UPS); |
|
|
20ms typical (Appliances) |
||
|
Peak Efficiency |
91% |
|
|
Overload Protection |
[email protected] >150% Io ad; [email protected] 110% ~ 150% Io ad |
|
|
Surge Capacity |
2* rated power for 5 seconds |
|
|
Nominal DC Input Voltage |
12Vdc |
24Vdc |
|
Cold Start Voltage |
11.5Vdc |
23.0Vdc |
|
High DC Recovery Voltage |
14.0Vdc |
32Vdc |
|
High DC Cut-off Voltage |
16.0Vdc |
33Vdc |
|
No Load Power Consumption |
<25W |
<30W |
|
Utility Charging Mode |
||
|
INVERTER MODEL |
1.5KW 12V |
2.4KW 24V |
|
Charging Algorithm |
3-Step |
|
|
AC Charging Current (Max) |
60 Amp |
|
|
Bulk Charging Voltage |
||
|
Flooded Battery |
14.6 |
29.2 |
|
AGM / Gel Battery |
14.1 |
28.2 |
|
Floating Charging Voltage |
13.5Vdc |
27.0Vdc |
|
MPPT Solar Charging Mode |
||
|
INVERTER MODEL |
1.5KW 12V |
2.4KW 24V |
|
Max. PV Array Power |
2000W |
3000W |
|
Nominal PV Voltage |
240Vdc |
240Vdc |
|
PV Array MPPT Voltage Range |
90~430Vdc |
90~430Vdc |
|
Max. PV Array Open Circuit Voltage |
450Vdc |
450Vdc |
|
Max Charging Current (AC charger plus solar charger) |
80Amp |
80Amp |
|
INVERTER MODEL |
1.5KW 12V |
2.4KW 24V |
|
Safety Certification |
CE |
|
|
Operating Temperature Range |
-10°C to 50°C |
|
|
Storage temperature |
-15°C~ 60° C |
|
|
Humidity |
5% to 95% Relative Humidity (Non-condensing) |
|
|
Dimension (D*W* H), mm |
348X270X95 |
|
|
Net Weight, kg |
6 |
6 |
