Sale!

Tesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY Kit

$40.00$57.00

& Free Shipping

The Hfsstc (high-frequency Tesla coil) is a common name for “electronic candles”. They are used in plasma balls and other electrical novelties. They can also be used as a teaching tool in physics classrooms to demonstrate electromagnetic induction, AC circuits, and Faraday’s law of induction.

The working voltage for this Tesla coil is DC36V-48V, with a working current of 1.8-2.5A. The working frequency is around 15mhz.

This product comes with safety precautions and instructions. It is important to follow the directions carefully to avoid any accidents, such as fire, electric shock, or burns. Some parts of the product are strictly forbidden to touch during operation

Clear
Estimated delivery between 2022/10/01 - 2022/10/11
SKU: 3256802206295039 Category:

😊 Free Shipping To Your Location! 📦




⭐⭐⭐⭐⭐ Top Rated Product!

HFSSTC Tesla Coil High-Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY Kit

 

Product information:

Name: Hfsstc (high-frequency Tesla coil) commonly known as “electronic candle”

Working voltage: DC36V-48V

Working current: 1.8-2.5A

Working frequency: around 15mhz

 

Safety precautions:

Please use strictly in accordance with the instructions, if improper use is likely to cause fire, electric shock, burns, and other accidents

 

Parts that are strictly forbidden to touch during work: the secondary coil, the top coil of the main unit, and the output discharge needle of the main unit

 

Do not use over-voltage, the working power supply voltage should not be higher than DC 52V

 

Don’t change the parameters arbitrarily

 

The positive and negative poles of the power supply are strictly prohibited

 

The recommended working time is less than 10 minutes. Exceeding the time will cause high-temperature aging and damage to the ignition coil

To ensure safety, please make sure that there are no flammable and explosive materials around the product before work

 

When working, it will produce certain electromagnetic interference to the surrounding electronic equipment

 

This product is not waterproof, please do not use it in an excessively humid place

 

Do not use objects to connect the high temperature tape part of the primary secondary coil during work to avoid secondary damage

 

Use steps/methods

1. Place the host and connect the host and secondary coil correctly

2. Connect the power supply and the fan starts to work

3. Turn on the switch, and the indicator light next to the switch is on (the left side of the switch is on and the right is off) the indicator light on the bottom of the coil is on

4. Touch the top of the secondary coil with metal as soon as possible to ignite the flame

 

Note:

If the power indicator is on but not working after turning on the switch, you need to adjust the potentiometer on the host

 

Adjustment method:

After turning on the switch, slowly rotate clockwise until the signal light on the top of the main engine lights up, and the secondary ignition coil can be ignited. Adjusting to just the arc is the best state, too large will cause the main circuit current to be too large or even damage! (All have been debugged before shipment, use this method to adjust under special circumstances)

Tesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY KitTesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY KitTesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY KitTesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY KitTesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY KitTesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY Kit

Brand Name

diymore

Condition

New

Type

Voltage Regulator

Model Number

HFSSTC Tesla Coil

Application

Electric Toy

Operating Temperature

HFSSTC Tesla Coil

Supply Voltage

DC 36V-48V

Dissipation Power

HFSSTC Tesla Coil

Package

SOP

is_customized

Yes

Reviews

There are no reviews yet.

Be the first to review “Tesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY Kit”

Your email address will not be published.

Shopping Cart
×
Bought Recently
Tesla Coil High Frequency Electronic Candle DC 36V-48V 1.8-2.5A 10 Minutes Plasma Flame DIY Kit
$40.00$57.00